Zhurnal Radioelektroniki - Journal of Radio Electronics. eISSN 1684-1719. 2020. No. 11
Contents

Full text in Russian (pdf)

Russian page

 

DOI  https://doi.org/10.30898/1684-1719.2020.11.4

UDC 621.185.6

 

Evaluation of the influence of solid-phase connection technology on the heat dissipation ability of the SWS and the reliability of the TWT in the centimeter range

 

A. A. Volosova 1,2, I. A. Almaev 1,2, A. B. Danilov 2, A. Yu. Miroshnichenko 1

1 Yuri Gagarin Saratov State Technical University, 77 Politehnicheskaya Saratov 410054, Russia

2 JSC "NPP" Almaz ", 1, Panfilova str., Saratov 410033, Russia

 

The paper is received on November 13, 2020

 

Abstract. The article is devoted to the problems associated with the development of powerful traveling wave tube - heat removal from highly loaded elements. The aim of the study was to obtain a design of a slow wave structure of a high-power TWT by the solid-phase connection method and to assess the heat dissipation capacity of the resulting design. The article describes the increase of the heat dissipation capacity in spiral decelerating TWT systems. Various methods of fastening spiral pipes using ceramic support rods have been investigated. A technology has been developed and a design of a decelerating system of a high-power broadband TWT using a solid-phase connection of a spiral and supporting ceramic rods has been obtained. The heat dissipation capacity of the resulting structure is estimated. Improving the heat dissipation ability, increasing the efficiency of the device and increasing the reliability of the product.

Key words: traveling wave tube, helix, assembly technology, solid-phase connection, thermal resistance.

References

1.     Coaker B., Challi T. Traveling Wave Tubes: Modern Devices and Contemporary Application.  Microwave Journal. 2008. No.10. P. 32-46.

2.  Gilmore A.S.  Lampy s begushchey volnoy [Traveling-wave tubes]. Moscow, Technosphera Publ. 2013. 616 p. (In Russian)

3.  Alekhin Yu.V. Sverkhshirokopolosnyye lampy begushchey volny: issledovaniya v SVCH-, KVCH- i TGCH-diapazonakh: vnedreniye i proizvodstvo  [Ultra-wideband traveling wave lamps: research in the microwave, EHF and TGC ranges: implementation and production]. Moscow, Radiotekhnika Publ. 2015. 480 p. (In Russian)

4.  Rafalovich A.D. Uluchsheniye ekspluatatsionnykh kharakteristik shirokopolosnykh fazoidentichnykh lamp s begushchey volnoy i kompleksirovannykh usiliteley na ikh osnove [Improving the performance characteristics of broadband phase-identical traveling-wave lamps and integrated amplifiers based on them]. Ph.D. thesis. Saratov, Saratov State Technical Unirsity. 2014. 142 p. (In Russian)

5.  KB-2 company website https://www.solidworks.com/ru  (In Russian)

6.  Demkin N.B., Ryzhov E. Kachestvo poverkhnosti i kontakt detaley mashin [Surface quality and contact of machine parts]. Moscow, Mashinostroeniye Publ. 1981. 244 p. (In Russian)

7.  Popov V.M., Shvyrev A.N., Zheltov D.A. Heat transfer through the contact zone of lightly loaded joints with metal flat-rough surfaces. Voronezhskiy nauchno-tekhnicheskiy vestnik - Voronezh Scientific and Technical Bulletin 2019. No.1(27). P.77-84. (In Russian)

8.  Orlova M.D. Tverdofaznoye soyedineniye spirali i opornykh sterzhney iz keramiki za schet raznitsy termicheskogo koeffitsiyenta lineynogo rasshireniya elementov opravki [Solid-phase connection of elements of cermet units of spiral retarding systems of traveling wave lamps]. PhD thesis. Saratov, Saratov State Technical Unirsity. 2014. 109 p. (In Russian)

 

For citation:

Volosova A.A., Almaev I.A., Danilov A.B., Miroshnichenko A.Yu. Evaluation of the influence of solid-phase connection technology on the heat dissipation ability of the SWS and the reliability of the TWT in the centimeter range. Zhurnal Radioelektroniki - Journal of Radio Electronics. 2020. No.11. https://doi.org/10.30898/1684-1719.2020.11.4 (In Russian)